AI Analytics Product

AI Analytics Product — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Automated essay scoring

Automated essay scoring (AES) is the use of specialized computer programs to assign grades to essays written in an educational setting. It is a form of educational assessment and an application of natural language processing. Its objective is to classify a large set of textual entities into a small number of discrete categories, corresponding to the possible grades, for example, the numbers 1 to 6. Therefore, it can be considered a problem of statistical classification. Several factors have contributed to a growing interest in AES. Among them are cost, accountability, standards, and technology. Rising education costs have led to pressure to hold the educational system accountable for results by imposing standards. The advance of information technology promises to measure educational achievement at reduced cost. The use of AES for high-stakes testing in education has generated significant backlash, with opponents pointing to research that computers cannot yet grade writing accurately and arguing that their use for such purposes promotes teaching writing in reductive ways (i.e. teaching to the test). == History == Most historical summaries of AES trace the origins of the field to the work of Ellis Batten Page. In 1966, he argued for the possibility of scoring essays by computer, and in 1968 he published his successful work with a program called Project Essay Grade (PEG). Using the technology of that time, computerized essay scoring would not have been cost-effective, so Page abated his efforts for about two decades. Eventually, Page sold PEG to Measurement Incorporated. By 1990, desktop computers had become so powerful and so widespread that AES was a practical possibility. As early as 1982, a UNIX program called Writer's Workbench was able to offer punctuation, spelling and grammar advice. In collaboration with several companies (notably Educational Testing Service), Page updated PEG and ran some successful trials in the early 1990s. Peter Foltz and Thomas Landauer developed a system using a scoring engine called the Intelligent Essay Assessor (IEA). IEA was first used to score essays in 1997 for their undergraduate courses. It is now a product from Pearson Educational Technologies and used for scoring within a number of commercial products and state and national exams. IntelliMetric is Vantage Learning's AES engine. Its development began in 1996. It was first used commercially to score essays in 1998. Educational Testing Service offers "e-rater", an automated essay scoring program. It was first used commercially in February 1999. Jill Burstein was the team leader in its development. ETS's Criterion Online Writing Evaluation Service uses the e-rater engine to provide both scores and targeted feedback. Lawrence Rudner has done some work with Bayesian scoring, and developed a system called BETSY (Bayesian Essay Test Scoring sYstem). Some of his results have been published in print or online, but no commercial system incorporates BETSY as yet. Under the leadership of Howard Mitzel and Sue Lottridge, Pacific Metrics developed a constructed response automated scoring engine, CRASE. Currently utilized by several state departments of education and in a U.S. Department of Education-funded Enhanced Assessment Grant, Pacific Metrics’ technology has been used in large-scale formative and summative assessment environments since 2007. Measurement Inc. acquired the rights to PEG in 2002 and has continued to develop it. In 2012, the Hewlett Foundation sponsored a competition on Kaggle called the Automated Student Assessment Prize (ASAP). 201 challenge participants attempted to predict, using AES, the scores that human raters would give to thousands of essays written to eight different prompts. The intent was to demonstrate that AES can be as reliable as human raters, or more so. The competition also hosted a separate demonstration among nine AES vendors on a subset of the ASAP data. Although the investigators reported that the automated essay scoring was as reliable as human scoring, this claim was not substantiated by any statistical tests because some of the vendors required that no such tests be performed as a precondition for their participation. Moreover, the claim that the Hewlett Study demonstrated that AES can be as reliable as human raters has since been strongly contested, including by Randy E. Bennett, the Norman O. Frederiksen Chair in Assessment Innovation at the Educational Testing Service. Some of the major criticisms of the study have been that five of the eight datasets consisted of paragraphs rather than essays, four of the eight data sets were graded by human readers for content only rather than for writing ability, and that rather than measuring human readers and the AES machines against the "true score", the average of the two readers' scores, the study employed an artificial construct, the "resolved score", which in four datasets consisted of the higher of the two human scores if there was a disagreement. This last practice, in particular, gave the machines an unfair advantage by allowing them to round up for these datasets. In 1966, Page hypothesized that, in the future, the computer-based judge will be better correlated with each human judge than the other human judges are. Despite criticizing the applicability of this approach to essay marking in general, this hypothesis was supported for marking free text answers to short questions, such as those typical of the British GCSE system. Results of supervised learning demonstrate that the automatic systems perform well when marking by different human teachers is in good agreement. Unsupervised clustering of answers showed that excellent papers and weak papers formed well-defined clusters, and the automated marking rule for these clusters worked well, whereas marks given by human teachers for the third cluster ('mixed') can be controversial, and the reliability of any assessment of works from the 'mixed' cluster can often be questioned (both human and computer-based). == Different dimensions of essay quality == According to a recent survey, modern AES systems try to score different dimensions of an essay's quality in order to provide feedback to users. These dimensions include the following items: Grammaticality: following grammar rules Usage: using of prepositions, word usage Mechanics: following rules for spelling, punctuation, capitalization Style: word choice, sentence structure variety Relevance: how relevant of the content to the prompt Organization: how well the essay is structured Development: development of ideas with examples Cohesion: appropriate use of transition phrases Coherence: appropriate transitions between ideas Thesis Clarity: clarity of the thesis Persuasiveness: convincingness of the major argument == Procedure == From the beginning, the basic procedure for AES has been to start with a training set of essays that have been carefully hand-scored. The program evaluates surface features of the text of each essay, such as the total number of words, the number of subordinate clauses, or the ratio of uppercase to lowercase letters—quantities that can be measured without any human insight. It then constructs a mathematical model that relates these quantities to the scores that the essays received. The same model is then applied to calculate scores of new essays. Recently, one such mathematical model was created by Isaac Persing and Vincent Ng. which not only evaluates essays on the above features, but also on their argument strength. It evaluates various features of the essay, such as the agreement level of the author and reasons for the same, adherence to the prompt's topic, locations of argument components (major claim, claim, premise), errors in the arguments, cohesion in the arguments among various other features. In contrast to the other models mentioned above, this model is closer in duplicating human insight while grading essays. Due to the growing popularity of deep neural networks, deep learning approaches have been adopted for automated essay scoring, generally obtaining superior results, often surpassing inter-human agreement levels. The various AES programs differ in what specific surface features they measure, how many essays are required in the training set, and most significantly in the mathematical modeling technique. Early attempts used linear regression. Modern systems may use linear regression or other machine learning techniques often in combination with other statistical techniques such as latent semantic analysis and Bayesian inference. The automated essay scoring task has also been studied in the cross-domain setting using machine learning models, where the models are trained on essays written for one prompt (topic) and tested on essays written for another prompt. Successful approaches in the cross-domain scenario are based on deep neural networks or models that combine deep and shallow features. == Criteria for success == Any method of a
Read more →
Score bug

A score bug is a digital on-screen graphic which is displayed in a broadcast of a sporting event, displaying the current score and other statistics. It is similar in function to a scoreboard, and is usually placed at either the top or lower third of the television screen. == History == The concept of a persistent score bug was devised by Sky Sports head David Hill, who was dissatisfied over having to wait to see what the score was after tuning into a football match in-progress. The score bug was introduced when Sky launched its coverage of the then newly-formed English Premier League in August 1992. Hill's boss repeatedly demanded that the graphic be removed, describing it as the "stupidest thing [he] had ever seen". Hill defied the boss's demands and kept the graphic in place. ITV introduced a score bug at the start of the 1993–94 football season, and the BBC introduced a score bug towards the end of 1993. The concept was introduced to the United States by ABC Sports and ESPN during coverage of the 1994 FIFA World Cup. Their justification for the graphic was to provide a location for a rotating series of sponsor logos, in order to allow matches to air without commercial interruption. With the acquisition of rights to the National Football League (NFL) by BSkyB's American sibling Fox (a fellow venture of Rupert Murdoch), Hill became the first president of Fox Sports. Under Hill's leadership, Fox introduced a version of the score bug branded as the "Fox Box", which was part of its inaugural season of NFL coverage in 1994. Variety criticized it as an "annoying see-through clock and score graphic" and expressed concern for people "who actually watched the beginning of the game and would rather have their screen clear of graphics". Hill even received a death threat from an irate viewer, with a specific emphasis on him being a "foreigner", but the score bug soon became a ubiquitous feature for American football broadcasts, along with almost all American sports broadcasts in the years that followed. Dick Ebersol of NBC Sports initially opposed the idea of a score bug, as he thought that fans would dislike seeing more graphics on the screen and would change the channel from blowout games if the score was constantly being displayed. Since the 2010s, the on-air design and positioning of some score bugs have been influenced by the needs of Internet video (especially when viewing an event on devices with smaller screens), including bugs noticeably larger than prior iterations designed with television viewing in mind, or designs primarily kept towards the bottom-center of the screen (easing the ability for the bug to remain visible when highlights are cropped for square videos posted on social media). == Details == Score bugs used in team sports typically include the names of both teams, an abbreviation of the team's name, and/or the team's logo; for individual sports, they include the names of individual competitors. In sports where a game clock or playing periods are used, those are generally also displayed as part of the score bug. Some broadcasts also include teams' win-loss records. In 2024, ESPN experimented with adding a persistent win probability meter to its bug in Major League Baseball, which was based on input from its statisticians. === Variations === In addition to the above information, score bugs in some sports include additional information: In baseball, score bugs display the current inning, number of outs, the pitch clock if applicable, and a graphic displaying which bases are occupied; and usually include names of the current pitcher and batter, the pitcher's pitch count, and the number of balls and strikes accrued by the batter. In basketball, score bugs generally include the shot clock, the number of fouls accrued by each team, and whether a team is in the bonus. In cricket, score bugs often take the form of larger dashboards across the bottom of the screen, displaying the current team up and their number of runs, wickets, and overs, a display showing the runs scored and number of balls faced by the current batting partnership, and statistics for the opposing team's bowler (including the number of wickets scored and runs given up). In American football, score bugs usually include the play clock and the down and distance of the current play; they also incorporate graphics indicating when a penalty flag has been thrown. In ice hockey, score bugs display when a penalty or power play is in effect, and often include the number of shots on goal accrued by each team. In golf, Fox popularized the display of a persistent leaderboard graphic in the bottom-right of the screen, usually displaying the top 5. ==== Racing ==== Telecasts of automobile races often include a score bug with the current positions of participants, statistics such as distance behind the leader, and the remaining distance or number of laps. In the mid-2010s, NASCAR broadcasters such as Fox began to transition from horizontal tickers to vertical leaderboards (also referred to as "pylons", in reference to the physical scoring pylons at). The CW differentiated itself by using a horizontal display that divides the field into multiple columns along the bottom of the screen.
Read more →
Rendering equation

In computer graphics, the rendering equation is an integral equation that expresses the amount of light leaving a point on a surface as the sum of emitted light and reflected light. It was independently introduced into computer graphics by David Immel et al. and James Kajiya in 1986. The equation is important in the theory of physically based rendering, describing the relationships between the bidirectional reflectance distribution function (BRDF) and the radiometric quantities used in rendering. The rendering equation is defined at every point on every surface in the scene being rendered, including points hidden from the camera. The incoming light quantities on the right side of the equation usually come from the left (outgoing) side at other points in the scene (ray casting can be used to find these other points). The radiosity rendering method solves a discrete approximation of this system of equations. In distributed ray tracing, the integral on the right side of the equation may be evaluated using Monte Carlo integration by randomly sampling possible incoming light directions. Path tracing improves and simplifies this method. The rendering equation can be extended to handle effects such as fluorescence (in which some absorbed energy is re-emitted at different wavelengths) and can support transparent and translucent materials by using a bidirectional scattering distribution function (BSDF) in place of a BRDF. The theory of path tracing sometimes uses a path integral (integral over possible paths from a light source to a point) instead of the integral over possible incoming directions. == Equation form == The rendering equation may be written in the form L o ( x , ω o , λ , t ) = L e ( x , ω o , λ , t ) + L r ( x , ω o , λ , t ) {\displaystyle L_{\text{o}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)=L_{\text{e}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)+L_{\text{r}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} L r ( x , ω o , λ , t ) = ∫ Ω f r ( x , ω i , ω o , λ , t ) L i ( x , ω i , λ , t ) ( ω i ⋅ n ) d ⁡ ω i {\displaystyle L_{\text{r}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)=\int _{\Omega }f_{\text{r}}(\mathbf {x} ,\omega _{\text{i}},\omega _{\text{o}},\lambda ,t)L_{\text{i}}(\mathbf {x} ,\omega _{\text{i}},\lambda ,t)(\omega _{\text{i}}\cdot \mathbf {n} )\operatorname {d} \omega _{\text{i}}} where L o ( x , ω o , λ , t ) {\displaystyle L_{\text{o}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} is the total spectral radiance of wavelength λ {\displaystyle \lambda } directed outward along direction ω o {\displaystyle \omega _{\text{o}}} at time t {\displaystyle t} , from a particular position x {\displaystyle \mathbf {x} } x {\displaystyle \mathbf {x} } is the location in space ω o {\displaystyle \omega _{\text{o}}} is the direction of the outgoing light λ {\displaystyle \lambda } is a particular wavelength of light t {\displaystyle t} is time L e ( x , ω o , λ , t ) {\displaystyle L_{\text{e}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} is emitted spectral radiance L r ( x , ω o , λ , t ) {\displaystyle L_{\text{r}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} is reflected spectral radiance ∫ Ω … d ⁡ ω i {\displaystyle \int _{\Omega }\dots \operatorname {d} \omega _{\text{i}}} is an integral over Ω {\displaystyle \Omega } Ω {\displaystyle \Omega } is the unit hemisphere centered around n {\displaystyle \mathbf {n} } containing all possible values for ω i {\displaystyle \omega _{\text{i}}} where ω i ⋅ n > 0 {\displaystyle \omega _{\text{i}}\cdot \mathbf {n} >0} f r ( x , ω i , ω o , λ , t ) {\displaystyle f_{\text{r}}(\mathbf {x} ,\omega _{\text{i}},\omega _{\text{o}},\lambda ,t)} is the bidirectional reflectance distribution function, the proportion of light reflected from ω i {\displaystyle \omega _{\text{i}}} to ω o {\displaystyle \omega _{\text{o}}} at position x {\displaystyle \mathbf {x} } , time t {\displaystyle t} , and at wavelength λ {\displaystyle \lambda } ω i {\displaystyle \omega _{\text{i}}} is the negative direction of the incoming light L i ( x , ω i , λ , t ) {\displaystyle L_{\text{i}}(\mathbf {x} ,\omega _{\text{i}},\lambda ,t)} is spectral radiance of wavelength λ {\displaystyle \lambda } coming inward toward x {\displaystyle \mathbf {x} } from direction ω i {\displaystyle \omega _{\text{i}}} at time t {\displaystyle t} n {\displaystyle \mathbf {n} } is the surface normal at x {\displaystyle \mathbf {x} } ω i ⋅ n {\displaystyle \omega _{\text{i}}\cdot \mathbf {n} } is the weakening factor of outward irradiance due to incident angle, as the light flux is smeared across a surface whose area is larger than the projected area perpendicular to the ray. This is often written as cos ⁡ θ i {\displaystyle \cos \theta _{i}} . Two noteworthy features are: its linearity—it is composed only of multiplications and additions, and its spatial homogeneity—it is the same in all positions and orientations. These mean a wide range of factorings and rearrangements of the equation are possible. It is a Fredholm integral equation of the second kind, similar to those that arise in quantum field theory. Note this equation's spectral and time dependence — L o {\displaystyle L_{\text{o}}} may be sampled at or integrated over sections of the visible spectrum to obtain, for example, a trichromatic color sample. A pixel value for a single frame in an animation may be obtained by fixing t ; {\displaystyle t;} motion blur can be produced by averaging L o {\displaystyle L_{\text{o}}} over some given time interval (by integrating over the time interval and dividing by the length of the interval). Note that a solution to the rendering equation is the function L o {\displaystyle L_{\text{o}}} . The function L i {\displaystyle L_{\text{i}}} is related to L o {\displaystyle L_{\text{o}}} via a ray-tracing operation: The incoming radiance from some direction at one point is the outgoing radiance at some other point in the opposite direction. == Applications == Solving the rendering equation for any given scene is the primary challenge in realistic rendering. One approach to solving the equation is based on finite element methods, leading to the radiosity algorithm. Another approach using Monte Carlo methods has led to many different algorithms including path tracing, photon mapping, and Metropolis light transport, among others. == Limitations == Although the equation is very general, it does not capture every aspect of light reflection. Some missing aspects include the following: Transmission, which occurs when light is transmitted through the surface, such as when it hits a glass object or a water surface, Subsurface scattering, where the spatial locations for incoming and departing light are different. Surfaces rendered without accounting for subsurface scattering may appear unnaturally opaque — however, it is not necessary to account for this if transmission is included in the equation, since that will effectively include also light scattered under the surface, Polarization, where different light polarizations will sometimes have different reflection distributions, for example when light bounces at a water surface, Phosphorescence, which occurs when light or other electromagnetic radiation is absorbed at one moment and emitted at a later moment, usually with a longer wavelength (unless the absorbed electromagnetic radiation is very intense), Interference, where the wave properties of light are exhibited, Fluorescence, where the absorbed and emitted light have different wavelengths, Non-linear effects, where very intense light can increase the energy level of an electron with more energy than that of a single photon (this can occur if the electron is hit by two photons at the same time), and emission of light with higher frequency than the frequency of the light that hit the surface suddenly becomes possible, and Doppler effect, where light that bounces off an object moving at a very high speed will get its wavelength changed: if the light bounces off an object that is moving towards it, the light will be blueshifted and the photons will be packed more closely so the photon flux will be increased; if it bounces off an object moving away from it, it will be redshifted and the photon flux will be decreased. This effect becomes apparent only at speeds comparable to the speed of light, which is not the case for most rendering applications. For scenes that are either not composed of simple surfaces in a vacuum or for which the travel time for light is an important factor, researchers have generalized the rendering equation to produce a volume rendering equation suitable for volume rendering and a transient rendering equation for use with data from a time-of-flight camera.
Read more →
User-defined function

A user-defined function (UDF) is a function provided by the user of a program or environment, in a context where the usual assumption is that functions are built into the program or environment. UDFs are usually written for the requirement of its creator. == BASIC language == In some old implementations of the BASIC programming language, user-defined functions are defined using the "DEF FN" syntax. More modern dialects of BASIC are influenced by the structured programming paradigm, where most or all of the code is written as user-defined functions or procedures, and the concept becomes practically redundant. == COBOL language == In the COBOL programming language, a user-defined function is an entity that is defined by the user by specifying a FUNCTION-ID paragraph. A user-defined function must return a value by specifying the RETURNING phrase of the procedure division header and they are invoked using the function-identifier syntax. See the ISO/IEC 1989:2014 Programming Language COBOL standard for details. As of May 2022, the IBM Enterprise COBOL for z/OS 6.4 (IBM COBOL) compiler contains support for user-defined functions. == Databases == In relational database management systems, a user-defined function provides a mechanism for extending the functionality of the database server by adding a function, that can be evaluated in standard query language (usually SQL) statements. The SQL standard distinguishes between scalar and table functions. A scalar function returns only a single value (or NULL), whereas a table function returns a (relational) table comprising zero or more rows, each row with one or more columns. User-defined functions in SQL are declared using the CREATE FUNCTION statement. For example, a user-defined function that converts Celsius to Fahrenheit (a temperature scale used in USA) might be declared like this: Once created, a user-defined function may be used in expressions in SQL statements. For example, it can be invoked where most other intrinsic functions are allowed. This also includes SELECT statements, where the function can be used against data stored in tables in the database. Conceptually, the function is evaluated once per row in such usage. For example, assume a table named Elements, with a row for each known chemical element. The table has a column named BoilingPoint for the boiling point of that element, in Celsius. The query would retrieve the name and the boiling point from each row. It invokes the CtoF user-defined function as declared above in order to convert the value in the column to a value in Fahrenheit. Each user-defined function carries certain properties or characteristics. The SQL standard defines the following properties: Language - defines the programming language in which the user-defined function is implemented; examples include SQL, C, C# and Java. Parameter style - defines the conventions that are used to pass the function parameters and results between the implementation of the function and the database system (only applicable if language is not SQL). Specific name - a name for the function that is unique within the database. Note that the function name does not have to be unique, considering overloaded functions. Some SQL implementations require that function names are unique within a database, and overloaded functions are not allowed. Determinism - specifies whether the function is deterministic or not. The determinism characteristic has an influence on the query optimizer when compiling a SQL statement. SQL-data access - tells the database management system whether the function contains no SQL statements (NO SQL), contains SQL statements but does not access any tables or views (CONTAINS SQL), reads data from tables or views (READS SQL DATA), or actually modifies data in the database (MODIFIES SQL DATA). User-defined functions should not be confused with stored procedures. Stored procedures allow the user to group a set of SQL commands. A procedure can accept parameters and execute its SQL statements depending on those parameters. A procedure is not an expression and, thus, cannot be used like user-defined functions. Some database management systems allow the creation of user defined functions in languages other than SQL. Microsoft SQL Server, for example, allows the user to use .NET languages including C# for this purpose. DB2 and Oracle support user-defined functions written in C or Java programming languages. === SQL Server 2000 === There are three types of UDF in Microsoft SQL Server 2000: scalar functions, inline table-valued functions, and multistatement table-valued functions. Scalar functions return a single data value (not a table) with RETURNS clause. Scalar functions can use all scalar data types, with exception of timestamp and user-defined data types. Inline table-valued functions return the result set of a single SELECT statement. Multistatement table-valued functions return a table, which was built with many TRANSACT-SQL statements. User-defined functions can be invoked from a query like built‑in functions such as OBJECT_ID, LEN, DATEDIFF, or can be executed through an EXECUTE statement like stored procedures. Performance Notes: User-defined functions are subroutines made of one or more Transact-SQL statements that can be used to encapsulate code for reuse. It takes zero or more arguments and evaluates a return value. Has both control-flow and DML statements in its body similar to stored procedures. Does not allow changes to any Global Session State, like modifications to database or external resource, such as a file or network. Does not support output parameter. DEFAULT keyword must be specified to pass the default value of parameter. Errors in UDF cause UDF to abort which, in turn, aborts the statement that invoked the UDF. === Apache Hive === Apache Hive defines, in addition to the regular user-defined functions (UDF), also user-defined aggregate functions (UDAF) and table-generating functions (UDTF). Hive enables developers to create their own custom functions with Java. === Apache Doris === Apache Doris, an open-source real-time analytical database, allows external users to contribute their own UDFs written in C++ to it.
Read more →
Mixed raster content

Mixed raster content (MRC) is a method for compressing images that contain both binary-compressible text and continuous-tone components, using image segmentation methods to improve the level of compression and the quality of the rendered image. By separating the image into components with different compressibility characteristics, the most efficient and accurate compression algorithm for each component can be applied. MRC-compressed images are typically packaged into a hybrid file format such as DjVu and sometimes PDF. This allows for multiple images, and the instructions to properly render and reassemble them, to be stored within a single file. Some image scanners optionally support MRC when scanning to PDF. A typical manual states that without MRC, the image is generated in a single process, with text and graphics not distinguished. With MRC, separate processes are used for text, graphics, and other elements, producing clearer graphics and sharper text, at the price of slightly slower processing. MRC is recommended to optimise the scanning of documents with harder-to-read text or lower-quality graphics. MRC can also reduce the size of the scanned file, though higher compression using JBIG2 can sometimes lead to character substitution errors in scanned documents. == File format == A form of MRC is defined by international standard bodies as ISO/IEC 16485, or ITU recommendation T.44 (accessible free of charge). It defines a file format with bilevel masks and two data layers in each "stripe" of the image. The mask can be encoded in ITU T.4, JBIG1, or JBIG2, while the images can be JPEG, JBIG1, or run-length encoded color. The format is loosely based on JPEG, with a APP13 segment registered for this purpose. It is not known whether this file format is actually used, as formats like DjVu and PDF have their own ways of defining layers and masks.
Read more →
Adrozek

Adrozek is malware that injects fake ads into online search results. Microsoft announced the malware threat on 10 December 2020, and noted that many different browsers are affected, including Google Chrome, Microsoft Edge, Mozilla Firefox and Yandex Browser. The malware was first detected in May 2020 and, at its peak in August 2020, controlled over 30,000 devices a day. But during the December 2020 announcement, Microsoft claimed "hundreds of thousands" of infected devices worldwide between May and September 2020. According to Microsoft, if not detected and blocked, Adrozek adds browser extensions, modifies a specific DLL per target browser, and changes browser settings to insert additional, unauthorized ads into web pages, often on top of legitimate ads from search engines. For each user tricked into clicking on the fake ads, the scammers earn affiliate advertising dollars. The malware has been observed to extract device data and, in some cases, steal credentials, sending them to remote servers. Users may unintentionally install the malware because of a drive-by download, by visiting a tampered website, opening an e-mail attachment, or clicking on a deceptive link or a deceptive pop-up window. The main malware program is downloaded to the “Programs Files” folder using file names such as Audiolava.exe, QuickAudio.exe, and converter.exe. According to PC Magazine, a good way to avoid, or mitigate, infection by Adrozek is to keep browser and related software programs up to date.
Read more →
Thunderspy

Thunderspy is a type of security vulnerability, based on the Intel Thunderbolt 3 port, first reported publicly on 10 May 2020, that can result in an evil maid (i.e., attacker of an unattended device) attack gaining full access to a computer's information in about five minutes, and may affect millions of Apple, Linux and Windows computers, as well as any computers manufactured before 2019, and some after that. According to Björn Ruytenberg, the discoverer of the vulnerability, "All the evil maid needs to do is unscrew the backplate, attach a device momentarily, reprogram the firmware, reattach the backplate, and the evil maid gets full access to the laptop. All of this can be done in under five minutes." The malicious firmware is used to clone device identities which makes classical DMA attack possible. == History == The Thunderspy security vulnerabilities were first publicly reported by Björn Ruytenberg of Eindhoven University of Technology in the Netherlands on 10 May 2020. Thunderspy is similar to Thunderclap, another security vulnerability, reported in 2019, that also involves access to computer files through the Thunderbolt port. == Impact == The security vulnerability affects millions of Apple, Linux and Windows computers, as well as all computers manufactured before 2019, and some after that. However, this impact is restricted mainly to how precise a bad actor would have to be to execute the attack. Physical access to a machine with a vulnerable Thunderbolt controller is necessary, as well as a writable ROM chip for the Thunderbolt controller's firmware. Additionally, part of Thunderspy, specifically the portion involving re-writing the firmware of the controller, requires the device to be in sleep, or at least in some sort of powered-on state, to be effective. Machines that force power-off when the case is open may assist in resisting this attack to the extent that the feature (switch) itself resists tampering. Due to the nature of attacks that require extended physical access to hardware, it's unlikely the attack will affect users outside of a business or government environment. == Mitigation == The researchers claim there is no easy software solution, and may only be mitigated by disabling the Thunderbolt port altogether. However, the impacts of this attack (reading kernel level memory without the machine needing to be powered off) are largely mitigated by anti-intrusion features provided by many business machines. Intel claims enabling such features would substantially restrict the effectiveness of the attack. Microsoft's official security recommendations recommend disabling sleep mode while using BitLocker. Using hibernation in place of sleep mode turns the device off, mitigating potential risks of attack on encrypted data.
Read more →
Threat actor

In cybersecurity and risk assessment, a threat actor (or threat agents, attackers, or adversaries) is a person, group, organisation, state, or other entity with the ability to cause, carry, transmit, support, or exploit a threat. Threat actors are commonly analysed according to their motivations, resources, technical capability, access to systems, relationship to a target, and degree of connection to state authority. They may exploit vulnerabilities, conduct social engineering, steal or monetise data, disrupt operations, or support other actors who carry out such activity. Because the term covers a wide range of actors, researchers and security organisations use taxonomies that distinguish between groups such as cybercriminals, state-linked actors, ideologically motivated actors, thrill seekers or trolls, insiders, and competitors. Threat actor classifications are used in risk management, cyber threat intelligence, and incident response to connect observed behaviour with possible objectives and likely future activity. The categories are not always mutually exclusive: the same actor may combine criminal, ideological, commercial, or state-linked motivations, and different organisations may use different names for similar actors. == Risk assessment and security management == In risk assessment, threat actor analysis is used to identify who or what may create, carry, transmit, support, or exploit a threat, and how that actor relates to the system being assessed. Rausand and Haugen classify threat actors by their relationship to the system, distinguishing between internal and external actors, and by intent, distinguishing between intentional and unintentional actors. Threat actor classification may also support incident investigation. Rogers argued that actor categories could be inferred from observable case points, such as tools used, messages left, data targeted, forensic knowledge, and the degree of damage, allowing investigators to assess likely motivation and skill level. Later work similarly linked actor classification to operational analysis. Chng, Lu, Kumar and Yau proposed a framework connecting hacker types, motivations and typical strategies, arguing that observed behaviour before or during an attack can help analysts infer the likely type of actor involved. At the strategic level, actor analysis may consider an actor's resources, capabilities, degree of state involvement, motivations and objectives. == Landscape == The United Nations Institute for Disarmament Research has described the contemporary cyberthreat landscape as involving an increasingly diverse and interconnected set of actors, including state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, private companies and civilian volunteers. Its 2026 report argued that these actors vary in resources, technical sophistication and relationships with states, making it traditional distinctions between state, civilian combatant roles, and legitimate and illegitimate conduct harder to apply. == Academic taxonomies == Early taxonomies classified hackers by activity, skill, motivation, or criminal profile. Landreth proposed six categories based on activity: novice, student, tourist, crasher, and thief. Hollinger classified computer misuse into pirates, browsers, and crackers, describing a progression from less-skilled activity to more technically serious offences. Chantler used attributes including activity, skill, knowledge, motivation, and duration of involvement to distinguish between an elite group, neophytes, and "losers and lamers". Parker proposed seven profiles of cybercriminals: pranksters, hacksters, malicious hackers, personal problem solvers, career criminals, extreme advocates, and malcontents, addicts, and irrational or incompetent people. In 2000, Marc Rogers proposed a taxonomy of hackers with seven, non-mutually-exclusive categories: newbie/tool kit users, cyber-punks, internals, coders, old guard hackers, professional criminals, and cyber-terrorists. Rausand and Haugen distinguish between internal and external threat actors, and between intentional and unintentional threat actors. Internal actors have some relationship with, access to, or position inside the system or organisation, while external actors operate from outside it. Intentional actors seek to create, exploit, or support a threat event, whereas unintentional actors may cause or enable a threat event through error, negligence, accident, or lack of awareness. Rogers later revised his hacker taxonomy into Novices, Cyber-punks, Internals, Petty Thieves, Virus Writers, Old Guard hackers, Professional Criminals, Information Warriors, and, more tentatively, Political Activists. In the model, motivation is grouped into four broad domains: curiosity, notoriety, revenge, and financial gain. A 2022 review by Chng, Lu, Kumar and Yau examined 11 hacker typologies published over three decades and proposed a unified framework linking hacker types, motivations, and strategies. The framework identified 13 hacker types and seven motivations, and argued that observed strategies during an attack can help analysts infer the likely type of actor involved. == Government taxonomies == Taxonomies of threat actors by governments are much more likely to include state-level threat actors. In the United States the National Institute of Standards and Technology (NIST) uses the term threat source in its risk-assessment guidance: organisations are directed to identify and characterise threat sources of concern, including capability, intent and targeting for adversarial threat sources, and the range of effects for non-adversarial threat sources. NIST treats threat-source identification as part of the risk-assessment process, alongside identifying threat events, vulnerabilities, likelihood and impact. In the EU, European Union Agency for Cybersecurity publishes the annual ENISA Threat Landscape, which analyses cyber incidents and adversary behaviour affecting the European Union. The 2025 report analysed selected incidents from the previous year and grouped activity around cybercrime, state-aligned activity, foreign information manipulation and interference, and hacktivism. In ENISA's 2025 analysis, hacktivist activity dominated reporting, representing almost 80% of recorded incidents and consisting mainly of low-level distributed denial-of-service operations. ENISA also reported increasing convergence between hacktivism, cybercrime and state-nexus activity, including state-aligned use of hacktivist personas, hacktivist adoption of ransomware, and false-flag or impersonation activity. At the UN level, A 2026 report by the United Nations Institute for Disarmament Research described the cyberthreat landscape as involving state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, and civilian volunteers, with actors varying in resources, technical sophistication, and links to states. Canada defines threat actors as states, groups, or individuals who aim to cause harm by exploiting a vulnerability with malicious intent. A threat actor must be trying to gain access to information systems to access or alter data, devices, systems, or networks. The Japanese government's National Centre of Incident Readiness and Strategy (NISC) was established in 2015 to create a "free, fair and secure cyberspace" in Japan. The NICS created a cybersecurity strategy in 2018 that outlines nation-states and cybercrime to be some of the most key threats. It also indicates that terrorist usage of the cyberspace needs to be monitored and understood. The Security Council of the Russian Federation published the cyber security strategy doctrine in 2016. This strategy highlights the following threat actors as a risk to cyber security measures: nation-state actors, cyber criminals, and terrorists. == Techniques == Threat actors use techniques like Social engineering (security), and Phishing, alongside technical exploits like Cross-site scripting, SQL injection, and denial-of-service attacks. == Limitations == In practice, actor categories may overlap (Edward Snowden for example), and the same activity may combine features associated with hacktivism, cybercrime and state-linked operations. The lines between hacktivism, cybercrime and state-nexus activity had continued to blur, with shared toolsets, overlapping methods, fake personas, hacktivist adoption of ransomware, and cybercriminal or state-linked actors masquerading as other groups. Threat actor analysis also has limits as a risk-management method. NIST notes that risk assessments depend on their purpose, scope, assumptions, constraints, information sources, risk model and analytic approach, and that assessments are tied to particular time frames and organisational contexts. NIST also warns that simple threat-vulnerability pairing may be undesirable or problematic where there are many threats and vulnerabilities, and recom
Read more →
Insider threat

An insider threat is a perceived threat to an organization that comes from people within the organization, such as employees, former employees, contractors or business associates, who have inside information concerning the organization's security practices, data and computer systems. The threat may involve fraud, the theft of confidential or commercially valuable information, the theft of intellectual property, or the sabotage of computer systems. == Overview == Insiders may have accounts giving them legitimate access to computer systems, with this access originally having been given to them to serve in the performance of their duties; these permissions could be abused to harm the organization. Insiders are often familiar with the organization's data and intellectual property as well as the methods that are in place to protect them. This makes it easier for the insider to circumvent any security controls of which they are aware. Physical proximity to data means that the insider does not need to hack into the organizational network through the outer perimeter by traversing firewalls; rather they are in the building already, often with direct access to the organization's internal network. Insider threats are harder to defend against than attacks from outsiders, since the insider already has legitimate access to the organization's information and assets. An insider may attempt to steal property or information for personal gain or to benefit another organization or country. The threat to the organization could also be through malicious software left running on its computer systems by former employees, a so-called logic bomb. == Research == Insider threat is an active area of research in academia and government. The CERT Coordination Center at Carnegie-Mellon University maintains the CERT Insider Threat Center, which includes a database of more than 850 cases of insider threats, including instances of fraud, theft and sabotage; the database is used for research and analysis. CERT's Insider Threat Team also maintains an informational blog to help organizations and businesses defend themselves against insider crime. The Threat Lab and Defense Personnel and Security Research Center (DOD PERSEREC) has also recently emerged as a national resource within the United States of America. The Threat Lab hosts an annual conference, the SBS Summit. They also maintain a website that contains resources from this conference. Complimenting these efforts, a companion podcast was created, Voices from the SBS Summit. In 2022, the Threat Lab created an interdisciplinary journal, Counter Insider Threat Research and Practice (CITRAP) which publishes research on insider threat detection. === Findings === In the 2022 Data Breach Investigations Report (DBIR), Verizon found that 82% of breaches involved the human element, noting that employees continue to play a leading role in cybersecurity incidents and breaches. According to the UK Information Commissioners Office, 90% of all breaches reported to them in 2019 were the result of mistakes made by end users. This was up from 61% and 87% over the previous two years. A 2018 whitepaper reported that 53% of companies surveyed had confirmed insider attacks against their organization in the previous 12 months, with 27% saying insider attacks have become more frequent. A report published in July 2012 on the insider threat in the U.S. financial sector gives some statistics on insider threat incidents: 80% of the malicious acts were committed at work during working hours; 81% of the perpetrators planned their actions beforehand; 33% of the perpetrators were described as "difficult" and 17% as being "disgruntled". The insider was identified in 74% of cases. Financial gain was a motive in 81% of cases, revenge in 23% of cases, and 27% of the people carrying out malicious acts were in financial difficulties at the time. The US Department of Defense Personnel Security Research Center published a report that describes approaches for detecting insider threats. Earlier it published ten case studies of insider attacks by information technology professionals. Cybersecurity experts believe that 38% of negligent insiders are victims of a phishing attack, whereby they receive an email that appears to come from a legitimate source such as a company. These emails normally contain malware in the form of hyperlinks. == Typologies and ontologies == Multiple classification systems and ontologies have been proposed to classify insider threats. Traditional models of insider threat identify three broad categories: Malicious insiders, which are people who take advantage of their access to inflict harm on an organization; Negligent insiders, which are people who make errors and disregard policies, which place their organizations at risk; and Infiltrators, who are external actors that obtain legitimate access credentials without authorization. == Criticisms == Insider threat research has been criticized. Critics have argued that insider threat is a poorly defined concept. Forensically investigating insider data theft is notoriously difficult, and requires novel techniques such as stochastic forensics. Data supporting insider threat is generally proprietary (i.e., encrypted data). Theoretical/conceptual models of insider threat are often based on loose interpretations of research in the behavioral and social sciences, using "deductive principles and intuitions of subject matter expert." Adopting sociotechnical approaches, researchers have also argued for the need to consider insider threat from the perspective of social systems. Jordan Schoenherr said that "surveillance requires an understanding of how sanctioning systems are framed, how employees will respond to surveillance, what workplace norms are deemed relevant, and what ‘deviance’ means, e.g., deviation for a justified organization norm or failure to conform to an organizational norm that conflicts with general social values." By treating all employees as potential insider threats, organizations might create conditions that lead to insider threats. == Sector-specific concerns == === Healthcare === The healthcare industry faces particularly acute insider threat risks due to the large number of workforce members who require access to sensitive patient records for legitimate clinical purposes. The U.S. Department of Health and Human Services has identified unauthorized access by insiders, including workforce snooping on patient records and theft of protected health information for identity fraud, as a persistent enforcement concern. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule addresses insider threats through several administrative safeguards, including workforce security procedures requiring covered entities to implement policies for authorizing and supervising workforce members who work with electronic protected health information, as well as termination procedures to revoke access when employment ends (45 CFR 164.308(a)(3)). The rule also requires audit controls to record and examine information system activity (45 CFR 164.312(b)), enabling detection of unauthorized access by insiders. The December 2024 Notice of proposed rulemaking (NPRM) to overhaul the HIPAA Security Rule would strengthen insider threat defenses by mandating role-based access controls, requiring notification of relevant workforce members within 24 hours of any changes to access privileges, and requiring regular review of audit logs to detect anomalous access patterns.
Read more →
Event store

An event store is a type of database optimized for storage of events. Conceptually, an event store records only the events affecting an entity, dossier, or policy, and the state of the entity at any point in its history can be reconstructed by replaying its contributing events in sequential order. Events (and their corresponding data) are the only "real" facts that should be stored in the database. All other objects can be derived from these events, meaning they are instantiated in memory by runtime code as needed (e.g. for showing in a user interface). In theory, any object that aggregates over recorded event data is not stored in the database. Instead these objects are built 'on the fly', by traversing the event history. When the aggregated object instance is no longer needed, it can simply be discarded (released from memory). == Example with insurance policies == For example, the event store concept of a database can be applied to insurance policies or pension dossiers. In these policies or dossiers the instantiation of each object that make up the dossier or policy (the person, partner(s), employments, etc.) can be derived and can be instantiated in memory based on the real world events. == Double timeline == A crucial part of an event store database is that each event has a double timeline: This enables event stores to correct errors of events that have been entered into the event store database before. The two dates are: Valid date is the date at which the event has become valid. Transaction date is the date at which the event is entered into the database. == Error correction == Another crucial part of an event store database is that events that are stored are not allowed to be changed. Once stored, also erroneous events are not changed anymore. The only way to change (or better: correct) these events is to instantiate a new event with the new values and using the double timeline. A correcting event would have the new values of the original event, with an event data of that corrected event, but a different transaction date. This mechanism ensures reproducibility at each moment in the time, even in the time period before the correction has taken place. It also allows to reproduce situations based on erroneous events (if required). == Advantages and disadvantages == One advantage of the event store concept is that handling the effects of back dated events (events that take effect before previous events and that may even invalidate them) is much easier. An event store will simplify the code in that rolling back erroneous situations and rolling up the new, correct situations is not needed anymore. Disadvantage may be that the code needs to re-instantiate all objects in memory based on the events each time a service call is received for a specific dossier or policy. == Compared to regular databases == In regular databases, handling backdated events to correct previous, erroneous events can be painful as it often results in rolling back all previous, erroneous transactions and objects and rolling up the new, correct transactions and objects. In an event store, only the new event (and its corresponding facts) are stored. The code will then redetermine the transactions and objects based on the new facts in memory.
Read more →
Electronic sell-through

Electronic sell-through (EST) is a method of media distribution whereby consumers pay a one-time fee to download a media file for storage on a hard drive. Although EST is often described as a transaction that grants content "ownership" to the consumer, the content may become unusable after a certain period and may not be viewable using competing platforms. EST is used by a wide array of digital media products, including movies, television, music, games, and mobile applications. The term is sometimes used interchangeably with download to own (DTO). == Film and television == The film and television industry's $18.8 billion home entertainment market consists of rental and sell-through segments, the latter of which includes the electronic sell-through of digital content. In 2010, EST generated $683 million of total home entertainment revenues, putting it behind the more lucrative revenue streams of cable video-on-demand (VOD) and internet video-on-demand (iVOD), which brought in a combined $1.8 billion in the same period. In 2010, Apple's iTunes Store accounted for three quarters of the U.S. EST business. The rest of the EST market was captured by Microsoft (via its Zune Video platform), Sony, Amazon VOD (now Amazon Video), and Walmart (via its VUDU service). A number of industry trends indicate the future expansion of EST's share of digital distribution revenues. David Bishop, worldwide president of Sony Pictures Home Entertainment, describes the following outlook: "With the launch of UltraViolet (the cloud-based digital copy locker system) establishing a common digital distribution platform later this year, prices potentially coming down on digital sales, more marketing devoted to digital sellthrough, and studios adding more value to the sellthrough product by making HD available and building in smarter extra features, we see the balance tilting even more toward owning and collecting digital movies."
Read more →
Gooch shading

Gooch shading is a non-photorealistic rendering technique for shading objects. It is also known as "cool to warm" shading, and is widely used in technical illustration. == History == Gooch shading was developed by Amy Gooch et al. at the University of Utah School of Computing and first presented at the 1998 SIGGRAPH conference. It has since been implemented in shader libraries, software, and games released by Autodesk, Nvidia, and Valve. == Process == Gooch shading defines an additional two colors in conjunction with the original model color: a warm color (such as yellow) and a cool color (such as blue). The warm color indicates surfaces that are facing toward the light source while the cool color indicates surfaces facing away. This allows shading to occur only in mid-tones so that edge lines and highlights remain visually prominent. The Gooch shader is typically implemented in two passes: all objects in the scene are first drawn with the "cool to warm" shading, and in the second pass the object's edges are rendered in black.
Read more →
Neural radiance field

A neural radiance field (NeRF) is a neural field for reconstructing a three-dimensional representation of a scene from two-dimensional images. The NeRF model enables downstream applications of novel view synthesis, scene geometry reconstruction, and obtaining the reflectance properties of the scene. Additional scene properties such as camera poses may also be jointly learned. First introduced in 2020, it has since gained significant attention for its potential applications in computer graphics and content creation. == Algorithm == The NeRF algorithm represents a scene as a radiance field parametrized by a deep neural network (DNN). The network predicts a volume density and view-dependent emitted radiance given the spatial location ( x , y , z ) {\displaystyle (x,y,z)} and viewing direction in Euler angles ( θ , Φ ) {\displaystyle (\theta ,\Phi )} of the camera. By sampling many points along camera rays, traditional volume rendering techniques can produce an image. === Data collection === A NeRF needs to be retrained for each unique scene. The first step is to collect images of the scene from different angles and their respective camera pose. These images are standard 2D images and do not require a specialized camera or software. Any camera is able to generate datasets, provided the settings and capture method meet the requirements for SfM (Structure from Motion). This requires tracking of the camera position and orientation, often through some combination of SLAM, GPS, or inertial estimation. Researchers often use synthetic data to evaluate NeRF and related techniques. For such data, images (rendered through traditional non-learned methods) and respective camera poses are reproducible and error-free. === Training === For each sparse viewpoint (image and camera pose) provided, camera rays are marched through the scene, generating a set of 3D points with a given radiance direction (into the camera). For these points, volume density and emitted radiance are predicted using the multi-layer perceptron (MLP). An image is then generated through classical volume rendering. Because this process is fully differentiable, the error between the predicted image and the original image can be minimized with gradient descent over multiple viewpoints, encouraging the MLP to develop a coherent model of the scene. == Variations and improvements == Early versions of NeRF were slow to optimize and required that all input views were taken with the same camera in the same lighting conditions. These performed best when limited to orbiting around individual objects, such as a drum set, plants or small toys. Since the original paper in 2020, many improvements have been made to the NeRF algorithm, with variations for special use cases. === Fourier feature mapping === In 2020, shortly after the release of NeRF, the addition of Fourier Feature Mapping improved training speed and image accuracy. Deep neural networks struggle to learn high frequency functions in low dimensional domains; a phenomenon known as spectral bias. To overcome this shortcoming, points are mapped to a higher dimensional feature space before being fed into the MLP. γ ( v ) = [ a 1 cos ⁡ ( 2 π B 1 T v ) a 1 sin ⁡ ( 2 π B 1 T v ) ⋮ a m cos ⁡ ( 2 π B m T v ) a m sin ⁡ ( 2 π B m T v ) ] {\displaystyle \gamma (\mathrm {v} )={\begin{bmatrix}a_{1}\cos(2{\pi }{\mathrm {B} }_{1}^{T}\mathrm {v} )\\a_{1}\sin(2\pi {\mathrm {B} }_{1}^{T}\mathrm {v} )\\\vdots \\a_{m}\cos(2{\pi }{\mathrm {B} }_{m}^{T}\mathrm {v} )\\a_{m}\sin(2{\pi }{\mathrm {B} }_{m}^{T}\mathrm {v} )\end{bmatrix}}} Where v {\displaystyle \mathrm {v} } is the input point, B i {\displaystyle \mathrm {B} _{i}} are the frequency vectors, and a i {\displaystyle a_{i}} are coefficients. This allows for rapid convergence to high frequency functions, such as pixels in a detailed image. === Bundle-adjusting neural radiance fields === One limitation of NeRFs is the requirement of knowing accurate camera poses to train the model. Often times, pose estimation methods are not completely accurate, nor is the camera pose even possible to know. These imperfections result in artifacts and suboptimal convergence. So, a method was developed to optimize the camera pose along with the volumetric function itself. Called Bundle-Adjusting Neural Radiance Field (BARF), the technique uses a dynamic low-pass filter (DLPF) to go from coarse to fine adjustment, minimizing error by finding the geometric transformation to the desired image. This corrects imperfect camera poses and greatly improves the quality of NeRF renders. === Multiscale representation === Conventional NeRFs struggle to represent detail at all viewing distances, producing blurry images up close and overly aliased images from distant views. In 2021, researchers introduced a technique to improve the sharpness of details at different viewing scales known as mip-NeRF (comes from mipmap). Rather than sampling a single ray per pixel, the technique fits a gaussian to the conical frustum cast by the camera. This improvement effectively anti-aliases across all viewing scales. mip-NeRF also reduces overall image error and is faster to converge at about half the size of ray-based NeRF. === Learned initializations === In 2021, researchers applied meta-learning to assign initial weights to the MLP. This rapidly speeds up convergence by effectively giving the network a head start in gradient descent. Meta-learning also allowed the MLP to learn an underlying representation of certain scene types. For example, given a dataset of famous tourist landmarks, an initialized NeRF could partially reconstruct a scene given one image. === NeRF in the wild === Conventional NeRFs are vulnerable to slight variations in input images (objects, lighting) often resulting in ghosting and artifacts. As a result, NeRFs struggle to represent dynamic scenes, such as bustling city streets with changes in lighting and dynamic objects. In 2021, researchers at Google developed a new method for accounting for these variations, named NeRF in the Wild (NeRF-W). This method splits the neural network (MLP) into three separate models. The main MLP is retained to encode the static volumetric radiance. However, it operates in sequence with a separate MLP for appearance embedding (changes in lighting, camera properties) and an MLP for transient embedding (changes in scene objects). This allows the NeRF to be trained on diverse photo collections, such as those taken by mobile phones at different times of day. === Relighting === In 2021, researchers added more outputs to the MLP at the heart of NeRFs. The output now included: volume density, surface normal, material parameters, distance to the first surface intersection (in any direction), and visibility of the external environment in any direction. The inclusion of these new parameters lets the MLP learn material properties, rather than pure radiance values. This facilitates a more complex rendering pipeline, calculating direct and global illumination, specular highlights, and shadows. As a result, the NeRF can render the scene under any lighting conditions with no re-training. === Plenoctrees === Although NeRFs had reached high levels of fidelity, their costly compute time made them useless for many applications requiring real-time rendering, such as VR/AR and interactive content. Introduced in 2021, Plenoctrees (plenoptic octrees) enabled real-time rendering of pre-trained NeRFs through division of the volumetric radiance function into an octree. Rather than assigning a radiance direction into the camera, viewing direction is taken out of the network input and spherical radiance is predicted for each region. This makes rendering over 3000x faster than conventional NeRFs. === Sparse Neural Radiance Grid === Similar to Plenoctrees, this method enabled real-time rendering of pretrained NeRFs. To avoid querying the large MLP for each point, this method bakes NeRFs into Sparse Neural Radiance Grids (SNeRG). A SNeRG is a sparse voxel grid containing opacity and color, with learned feature vectors to encode view-dependent information. A lightweight, more efficient MLP is then used to produce view-dependent residuals to modify the color and opacity. To enable this compressive baking, small changes to the NeRF architecture were made, such as running the MLP once per pixel rather than for each point along the ray. These improvements make SNeRG extremely efficient, outperforming Plenoctrees. === Instant NeRFs === In 2022, researchers at Nvidia enabled real-time training of NeRFs through a technique known as Instant Neural Graphics Primitives. An innovative input encoding reduces computation, enabling real-time training of a NeRF, an improvement orders of magnitude above previous methods. The speedup stems from the use of spatial hash functions, which have O ( 1 ) {\displaystyle O(1)} access times, and parallelized architectures which run fast on modern GPUs. == Related techniques == === Plenoxels === Plen
Read more →
Image

An image or picture is a visual representation. An image can be two-dimensional, such as a drawing, painting, or photograph, or three-dimensional, such as a carving or sculpture. Images may be displayed through other media, including a projection on a surface, activation of electronic signals, or digital displays; they can also be reproduced through mechanical means, such as photography, printmaking, or photocopying. Images can also be animated through digital or physical processes. In the context of signal processing, an image is a distributed amplitude of color(s). In optics, the term image (or optical image) refers specifically to the reproduction of an object formed by light waves coming from the object. A volatile image exists or is perceived only for a short period. This may be a reflection of an object by a mirror, a projection of a camera obscura, or a scene displayed on a cathode-ray tube. A fixed image, also called a hard copy, is one that has been recorded on a material object, such as paper or textile. A mental image exists in an individual's mind as something one remembers or imagines. The subject of an image does not need to be real; it may be an abstract concept such as a graph or function or an imaginary entity. For a mental image to be understood outside of an individual's mind, however, there must be a way of conveying that mental image through the words or visual productions of the subject. == Characteristics == === Two-dimensional images === The broader sense of the word 'image' also encompasses any two-dimensional figure, such as a map, graph, pie chart, painting, or banner. In this wider sense, images can also be rendered manually, such as by drawing, the art of painting, or the graphic arts (such as lithography or etching). Additionally, images can be rendered automatically through printing, computer graphics technology, or a combination of both methods. A two-dimensional image does not need to use the entire visual system to be a visual representation. An example of this is a grayscale ("black and white") image, which uses the visual system's sensitivity to brightness across all wavelengths without taking into account different colors. A black-and-white visual representation of something is still an image, even though it does not fully use the visual system's capabilities. On the other hand, some processes can be used to create visual representations of objects that are otherwise inaccessible to the human visual system. These include microscopy for the magnification of minute objects, telescopes that can observe objects at great distances, X-rays that can visually represent the interior structures of the human body (among other objects), magnetic resonance imaging (MRI), positron emission tomography (PET scans), and others. Such processes often rely on detecting electromagnetic radiation that occurs beyond the light spectrum visible to the human eye and converting such signals into recognizable images. === Three-dimensional images === Aside from sculpture and other physical activities that can create three-dimensional images from solid material, some modern techniques, such as holography, can create three-dimensional images that are reproducible but intangible to human touch. Some photographic processes can now render the illusion of depth in an otherwise "flat" image, but "3-D photography" (stereoscopy) or "3-D film" are optical illusions that require special devices such as eyeglasses to create the illusion of depth. === Moving images === "Moving" two-dimensional images are actually illusions of movement perceived when still images are displayed in sequence, each image lasting less, and sometimes much less, than a fraction of a second. The traditional standard for the display of individual frames by a motion picture projector has been 24 frames per second (FPS) since at least the commercial introduction of "talking pictures" in the late 1920s, which necessitated a standard for synchronizing images and sounds. Even in electronic formats such as television and digital image displays, the apparent "motion" is actually the result of many individual lines giving the impression of continuous movement. This phenomenon has often been described as "persistence of vision": a physiological effect of light impressions remaining on the retina of the eye for very brief periods. Even though the term is still sometimes used in popular discussions of movies, it is not a scientifically valid explanation. Other terms emphasize the complex cognitive operations of the brain and the human visual system. "Flicker fusion", the "phi phenomenon", and "beta movement" are among the terms that have replaced "persistence of vision", though no one term seems adequate to describe the process. == Cultural and other uses == Image-making seems to have been common to virtually all human cultures since at least the Paleolithic era. Prehistoric examples of rock art—including cave paintings, petroglyphs, rock reliefs, and geoglyphs—have been found on every inhabited continent. Many of these images seem to have served various purposes: as a form of record-keeping; as an element of spiritual, religious, or magical practice; or even as a form of communication. Early writing systems, including hieroglyphics, ideographic writing, and even the Roman alphabet, owe their origins in some respects to pictorial representations. === Meaning and signification === Images of any type may convey different meanings and sensations for individual viewers, regardless of whether the image's creator intended them. An image may be taken simply as a more or less "accurate" copy of a person, place, thing, or event. It may represent an abstract concept, such as the political power of a ruler or ruling class, a practical or moral lesson, an object for spiritual or religious veneration, or an object—human or otherwise—to be desired. It may also be regarded for its purely aesthetic qualities, rarity, or monetary value. Such reactions can depend on the viewer's context. A religious image in a church may be regarded differently than the same image mounted in a museum. Some might view it simply as an object to be bought or sold. Viewers' reactions will also be guided or shaped by their education, class, race, and other contexts. The study of emotional sensations and their relationship to any given image falls into the categories of aesthetics and the philosophy of art. While such studies inevitably deal with issues of meaning, another approach to signification was suggested by the American philosopher, logician, and semiotician Charles Sanders Peirce. "Images" are one type of the broad category of "signs" proposed by Peirce. Although his ideas are complex and have changed over time, the three categories of signs that he distinguished stand out: The "icon," which relates to an object by resemblance to some quality of the object. A painted or photographed portrait is an icon by virtue of its resemblance to the painting's or photograph's subject. A more abstract representation, such as a map or diagram, can also be an icon. The "index," which relates to an object by some real connection. For example, smoke may be an index of fire, or the temperature recorded on a thermometer may be an index of a patient's illness or health. The "symbol," which lacks direct resemblance or connection to an object but whose association is arbitrarily assigned by the creator or dictated by cultural and historical habit, convention, etc. The color red, for example, may connote rage, beauty, prosperity, political affiliation, or other meanings within a given culture or context; the Swedish film director Ingmar Bergman claimed that his use of the color in his 1972 film Cries and Whispers came from his personal visualization of the human soul. A single image may exist in all three categories at the same time. The Statue of Liberty provides an example. While there have been countless two-dimensional and three-dimensional "reproductions" of the statue (i.e., "icons" themselves), the statue itself exists as an "icon" by virtue of its resemblance to a human woman (or, more specifically, previous representations of the Roman goddess Libertas or the female model used by the artist Frederic-Auguste Bartholdi). an "index" representing New York City or the United States of America in general due to its placement in New York Harbor, or with "immigration" from its proximity to the immigration center at Ellis Island. a "symbol" as a visualization of the abstract concept of "liberty" or "freedom" or even "opportunity" or "diversity". === Critiques of imagery === The nature of images, whether three-dimensional or two-dimensional, created for a specific purpose or only for aesthetic pleasure, has continued to provoke questions and even condemnation at different times and places. In his dialogue, The Republic, the Greek philosopher Plato described our apparent reality as a copy of a higher order of universal forms.
Read more →
Simple interactive object extraction

Simple interactive object extraction (SIOX) is an algorithm for extracting foreground objects from color images and videos with very little user interaction. It has been implemented as "foreground selection" tool in the GIMP (since version 2.3.3), as part of the tracer tool in Inkscape (since 0.44pre3), and as function in ImageJ and Fiji (plug-in). Experimental implementations were also reported for Blender and Krita. Although the algorithm was originally designed for videos, virtually all implementations use SIOX primarily for still image segmentation. In fact, it is often said to be the current de facto standard for this task in the open-source world. Initially, a free hand selection tool is used to specify the region of interest. It must contain all foreground objects to extract and as few background as possible. The pixels outside the region of interest form the sure background while the inner region define a superset of the foreground, i.e. the unknown region. A so-called foreground brush is then used to mark representative foreground regions. The algorithm outputs a selection mask. The selection can be refined by either adding further foreground markings or by adding background markings using the background brush. Technically, the algorithm performs the following steps: Create a set of representative colors for sure foreground and sure background, the so-called color signatures. Assign all image points to foreground or background by a weighted nearest neighbor search in the color signatures. Apply some standard image processing operations like erode, dilate, and blur to remove artifacts. Find the connected foreground components that are either large enough or marked by the user. For video segmentation the sure background and sure foreground regions are learned from motion statistics. SIOX also features tools that allow sub-pixel accurate refinement of edges and high texture areas, the so-called "detail refinement brushes". As with all segmentation algorithms, there are always pictures where the algorithm does not yield perfect results. The most critical drawback of SIOX is the color dependence. Although many photos are well-separable by color, the algorithm cannot deal with camouflage. If the foreground and background share many identical shades of similar colors, the algorithm might give a result with parts missing or incorrectly classified foreground. SIOX performs about equally well on different benchmarks compared to graph-based segmentation methods, such as Grabcut. SIOX is, however, more noise robust and can therefore also be used for the segmentation of videos. Graph-based segmentation methods search for a minimum cut and therefore tend to not perform optimally with complex structures. The algorithm has initially been developed at the department of computer science at Freie Universitaet Berlin. The main developer, Gerald Friedland, is now faculty at the EECS department of the University of California at Berkeley and also a Principal Data Scientist at Lawrence Livermore National Lab. He continues to support the development through mentoring, e.g. in the Google Summer of Code.
Read more →